您的位置: 标准下载 » 协会标准 » SAE 美国机动车工程师学会 »
热门标准
下载排行

SAE AMS4149 Aluminum Alloy, Die and Hand Forgings, 5.6Zn - 2.5Mg - 1.6Cu - 0.23Cr (7175-T74), Solution and Precipitation

作者:标准资料网 时间:2024-05-18 15:39:20  浏览:9034   来源:标准资料网
下载地址: 点击此处下载
Product Code:SAE AMS4149
Title:Aluminum Alloy, Die and Hand Forgings, 5.6Zn - 2.5Mg - 1.6Cu - 0.23Cr (7175-T74), Solution and Precipitation Heat Treated
Issuing Committee:Ams D Nonferrous Alloys Committee
Scope:This specification covers an aluminum alloy in the form of die and hand forgings.
下载地址: 点击此处下载
返回跳至顶部
【英文标准名称】:Starchandderivedproducts-Heavymetalscontent-Part2:Determinationofmercurycontentbyatomicabsorptionspectrometry
【原文标准名称】:淀粉和淀粉制品重金属含量第2部分:用原子吸收光谱法测定汞含量
【标准号】:ISO11212-2-1997
【标准状态】:现行
【国别】:国际
【发布日期】:1997-03
【实施或试行日期】:
【发布单位】:国际标准化组织(IX-ISO)
【起草单位】:ISO/TC93
【标准类型】:()
【标准水平】:()
【中文主题词】:化学分析和试验;定义;原子吸收分光光度测定法;原子吸收光谱测定法;淀粉;重金属;汞;淀粉制品;含量测定;诱导生成物;重金属含量
【英文主题词】:Agriculturalproducts;Atomicabsorptionspectrometry;Atomicabsorptionspectrophotometry;Chemicalanalysisandtesting;Definitions;Derivatives;Determination;Determinationofcontent;Foodproducts;Heavymetalcontent;Heavymetals;Mercury;Starchproducts;Starches
【摘要】:ThispartofISO11212specifiesamethodforthedeterminationofthemercurycontentofstarch,includingderivativesandby-products,byatomicabsorptionspectrometrywithcold-vapourgeneration.Thecold-vapourgeneratorscurrentlyavailableuseverydifferenttechniques;itisthusimpossibletoproposeacomprehensivemethodlikelytoensuretheattainmentofsatisfactoryresultsonalltypesofapparatus.Eachanalystshouldthereforeoptimizetheconditionsofuseofhis/herownapparatusonthebasisofgeneralorparticularinstructions.
【中国标准分类号】:X11
【国际标准分类号】:67_180_20
【页数】:6P.;A4
【正文语种】:英语


Product Code:SAE AMS2631
Title:Ultrasonic Inspection, Titanium and Titanium Alloy Bar and Billet
Issuing Committee:Ams K Non Destructive Methods And Processes Committee
Scope:This specification covers the procedure for ultrasonic inspection of wrought titanium and titanium alloy products 0.50 inch (12.7 mm) and over in cross-sectional thickness.This procedure has been used typically for locating internal defects, such as cracks, voids, spongy areas, and other structural discontinuities, which may or may not be exposed to the surface, but usage is not limited to such applications.Testing normally will be by longitudinal wave procedure, but shear wave procedure may be used when agreed upon by purchaser and vendor.